+8Hello,
Wondering if anyone else is having the same issue. Casper imaging is running perfectly fine , no errors on the imaging logs but when it tries to restart the newly imaged or re-imaged machine it just hangs and does nothing. The imaging process however has worked perfectly once I forcibly shut the machine down and turn it back on.
Is anyone else experiencing similar issues.
We are using a 10.9.4 net boot image.
+35hi @jamesdurler,
I did see this a few times when writing/testing AutoCasperNBI (https://jamfnation.jamfsoftware.com/discussion.html?id=11356).
Is ARD enabled on the NetBoot image? & are you ARD'd onto it when it hangs?
+8hi @bentoms,
Yes we have ARD enabled on the NetBoot image. I am not ARD'd onto it when it hangs.
Thanks
+35other things i found..
If you've just copied over the NBI, restart the service & wait about 10 minutes before netbooting &/or enter the NetBootClients() folder before netbooting.
In other words, i've seen it.. but not sure what is causing it & am not affected by it right now..
+4Try without ARD, I found after I turned ARD off I had better success (no restart hangs), try it and let us know.
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
