Error despite package run success

Question

Weird one here.

I'm trying to make a deployable Bootcamp image through Self Service. I have properly made Winclone image which has been successfully tested through the command line. I have a script that "appears" to work that is loosely based on another script that appeared on here a while back.

So i've created a non-flat package in Composer that places all the relevant files into /private/tmp/BootCampDeploy and then runs a postflight script to do the actual work. The package and script actually work but I find this in the policy log:

/usr/sbin/jamf is version 8.71
Executing Policy Bootcamp Deployment...
[STEP 1 of 3]
Mounting afp://server/CasperShare to /Volumes/CasperShare...
[STEP 2 of 3]
Copying Win7BootCampV4.pkg...
Installing Win7BootCampV4.pkg...
Installation failed. The installer reported: dyld: DYLD_ environment variables being ignored because main executable (/System/Library/PrivateFrameworks/Install.framework/Resources/runner) is setuid or setgid
installer: Package name is Win7BootCampV4
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
Unmounting file server...
[STEP 3 of 3]
Running Recon...
Locating mobile device records...
Displaying message to end user...

So uh huh I think. I'll not use Composer, and instead use Packages (and Iceberg for that matter too). I test again and get an installer failed message. The console log on the computer then reports the following:

Jul  3 20:36:27 macbook-pro.home installd[2255]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.Z5uy96/Scripts/org.ual.pkg.BootCampDeploy.FY6tNJ
Jul  3 20:36:29 macbook-pro.home installd[2255]: ./postinstall: Started verify/repair permissions on disk1 Macintosh HD
Jul  3 20:36:58 macbook-pro.home installd[2255]: ./postinstall: Permissions differ on "Library/Internet Plug-Ins/JavaAppletPlugin.plugin"; should be lrwxr-xr-x ; they are drwxr-xr-x 
Jul  3 20:36:58 macbook-pro.home installd[2255]: ./postinstall: Repaired "Library/Internet Plug-Ins/JavaAppletPlugin.plugin"
Jul  3 20:37:34 macbook-pro.home installd[2255]: ./postinstall: Finished verify/repair permissions on disk1 Macintosh HD
Jul  3 20:37:34 macbook-pro.home installd[2255]: ./postinstall: Wed  3 Jul 2013 20:37:34 BST- : Checking to see if HDD has any CoreStorage volumes...
Jul  3 20:39:16 macbook-pro.home installd[2255]: ./postinstall: 1
Jul  3 20:39:16 macbook-pro.home install_monitor[2260]: Re-included: /Applications, /Library, /System, /bin, /private, /sbin, /usr
Jul  3 20:39:16 macbook-pro.home installd[2255]: PackageKit: releasing backupd
Jul  3 20:39:16 macbook-pro.home installd[2255]: PackageKit: allow user idle system sleep
Jul  3 20:39:16 macbook-pro.home installd[2255]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “BootCampDeploy.pkg”." UserInfo=0x7fa7ac8124e0 {NSFilePath=./postinstall, NSURL=file://localhost/Users/rjpurves/BootCampDeploy/build/BootCampDeploy.pkg, PKInstallPackageIdentifier=org.ual.pkg.BootCampDeploy, NSLocalizedDescription=An error occurred while running scripts from the package “BootCampDeploy.pkg”.} {
        NSFilePath = "./postinstall";
        NSLocalizedDescription = "An error occurred while running scripts from the package U201cBootCampDeploy.pkgU201d.";
        NSURL = "file://localhost/Users/rjpurves/BootCampDeploy/build/BootCampDeploy.pkg";
        PKInstallPackageIdentifier = "org.ual.pkg.BootCampDeploy";
    }
Jul  3 20:39:16 macbook-pro.home installer[2253]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “BootCampDeploy.pkg”." UserInfo=0x7f89e2b2dba0 {NSFilePath=./postinstall, NSURL=file://localhost/Users/rjpurves/BootCampDeploy/build/BootCampDeploy.pkg, PKInstallPackageIdentifier=org.ual.pkg.BootCampDeploy, NSLocalizedDescription=An error occurred while running scripts from the package “BootCampDeploy.pkg”.}
Jul  3 20:39:17 macbook-pro.home installer[2253]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
Jul  3 20:39:31 macbook-pro.home installd[2255]: installd: Exiting.

The only other info I have is the script i'm running to do the work. If it's not the package, it must be something in here right?

#!/bin/bash

# Bootcamp deployment via Self Service
# Lovingly stolen and massively modified from https://github.com/sonic84/Deploy-Boot-Camp-From-Casper-Self-Service/blob/master/BootCampDeploy.sh
# Implemented : r.purves@arts.ac.uk
# Version 1.0 : 02-07-2013 - Initial Version

# This script is meant to be run as a post-flight package script.

WincloneName="Win7BootCampV4.winclone"
CD="/private/tmp/BootCampDeploy/CocoaDialog.app/Contents/MacOS/CocoaDialog"

##### Hard drive checks #####

$CD progressbar --indeterminate --title "Windows 7 Deployment" --text "Repairing Disk Permissions..."

diskutil repairPermissions /

echo "`date`- $appName: Checking to see if HDD has any CoreStorage volumes..."

coreStorage="`diskutil cs list`"

if [ "$coreStorage" != "No CoreStorage logical volume groups found" ]; then
    $CD ok-msgbox --title "Windows 7 Deployment" --text "Volume Error" --icon hazard --informative-text "CoreStorage Volume Detected." --no-cancel --float
    exit 1
fi

##### File Checks #####

counter="0"

if ! ( test -e /private/tmp/BootCampDeploy/"$WincloneName" ); then 
    $CD ok-msgbox --title "Windows 7 Deployment" --text "Volume Error" --icon hazard --informative-text "The package did not deploy correctly" --no-cancel --float    
    exit 1
fi

##### AC Power check #####

while [ $ACCheck -ne 0 ] 
do
    ACCheck=`pmset -g live | grep "AC Power" |  grep * | wc -l | awk '{print $1}'`

if [ "$ACCheck" != "1" ]; then
        $CD ok-msgbox --title "Windows 7 Deployment" --text "Battery Power Detected" --icon atom --informative-text "Please plug your system into AC power and try again." --no-cancel --float
        exit 1
    fi  
done

##### Disable McAfee Antivirus #####

SystemStarter stop cma
/usr/local/McAfee/AntiMalware/VSControl stopoas

##### Disable Computer Sleep #####

sleepvalue="`pmset -g | grep " sleep" | awk '{print $2}'`"
if [[ "$sleepvalue" =~ ^[0-9]+$ ]] ; then
    pmset sleep 0
else   
    noSetSleep=1
fi

##### Deploy the Winclone Image #####

bootcampHostID="`diskutil info BOOTCAMP | grep "Part of Whole:" | awk '{print $4}'`"
bootcampDiskID="`diskutil info BOOTCAMP | grep "Device Identifier:" | awk '{print $3}'`"
if [ "$bootcampDiskID"  = "" ] && [ "$bootcampHostID"  = "" ]; then
    $CD ok-msgbox --title "Warning" --text "Volume Error" --icon hazard --informative-text "Bootcamp volume not present" --no-cancel --float  
    exit 1
fi

diskutil unmount /Volumes/BOOTCAMP

if [ $? != 0 ]; then
    diskutil list
    diskutil unmount -f /Volumes/BOOTCAMP

if [ $? != 0 ]; then
        $CD ok-msgbox --title "Fatal Error" --text "Disk Error" --icon hazard --informative-text "Bootcamp volume could not be unmounted." --no-cancel --float
    exit 1
    fi
fi

# WincloneName is declared at the top of this script
# Call winclone.perl that resides in every winclone image to do a GUIless restore

# /private/tmp/BootCampDeploy/$WincloneName/winclone.perl -restore -copy_bcd="/private/tmp/BootCampDeploy/$WincloneName/BCD" -disk_device /dev/$bootcampHostID -ntfs_partition /dev/$bootcampDiskID -v -update_bootini -q -image_dir="/private/tmp/BootCampDeploy/$WincloneName" -gptrefresh_path="/private/tmp/BootCampDeploy/$WincloneName" -ntfstools_dir=/private/tmp/BootCampDeploy/$WincloneName -self-extract
/private/tmp/BootCampDeploy/$WincloneName/winclone.perl -restore -copy_bcd="/private/tmp/BootCampDeploy/$WincloneName/BCD" -disk_device /dev/$bootcampHostID -ntfs_partition /dev/$bootcampDiskID -v -update_bootini -q -image_dir="/private/tmp/BootCampDeploy/$WincloneName" -gptrefresh_path="/private/tmp/BootCampDeploy/$WincloneName" -ntfstools_dir=/private/tmp/BootCampDeploy/$WincloneName
if [ $? != 0 ]; then
    $CD ok-msgbox --title "Windows 7 Deployment" --text "Deployment Failure" --icon hazard --informative-text "Bootcamp volume restoration failed" --no-cancel --float
    exit 1
fi

##### Re-enable Sleep #####

if [ "$noSetSleep" = 1 ]; then
else
    pmset sleep $sleepvalue
fi

##### Re-enable McAfee #####

SystemStarter start cma
/usr/local/McAfee/AntiMalware/VSControl startoas

exit 0

Any thoughts on what i've missed?

tperfitt · Accepted Answer

We just released Winclone Pro 4.1. It has a new feature that allows you to create a package and installs via a post install script similar to this one. You can see how it work here:

http://twocanoes.com/winclone/support/create-a-boot-camp-installer-with-winclone-pro

Doc is here:

http://twocanoes.com/winclone/support/deploy-boot-camp-as-a-package-using-winclone-pro-4

If you already have Winclone Pro 4, you update your version by selecting Check for Updates... in the application menu.

franton · Answer

Hrm. I might have to pay for Winclone Pro out of my own pocket.

Sign up

Login with SSO

Login to the community

Login with SSO

Scanning file for viruses.

This file cannot be downloaded