Skip to main content
Question

Hosting NetSUS in Vsphere

  • October 26, 2012
  • 5 replies
  • 35 views
C
Forum|alt.badge.img+3

Is anyone hosting a NetSUS appliance in Vsphere? We are able to connect, upload the NBI, choose the NBI. But we are seeing two problems trying to configure via webadmin:

  1. It has a static IP, but under the Network panel in the webadmin, it does not take the IP address or Netmask. Only the Gateway is applied, along with the stock DNS. Entering anything results in the fields returning to blank.
  2. No matter what we put in "Listen on these subnets," Enable Netboot never works.

We did a POC using VMware on an OS X machine and it worked flawlessly. Trying to suss out what is different in this environment.

--joe

    5 replies

    jhbush
    Forum|alt.badge.img+27
    • jhbush
    • Esteemed Contributor
    • October 27, 2012

    You may need to assign it to a VLAN. We have a few in our lab with mixed results running on ESXi. NetBoot is very slow using IPHelpers across VLANS. It seems to need a GB network to really shine. I'm just going to wait for the JDS at this point.

    C
    Forum|alt.badge.img+3
    • chilcote
    • Author
    • New Contributor
    • November 5, 2012

    Got it configured in ESXi, and am experimenting with boot methods. Without ip-helpers, have you managed to craft a bless to boot from the appliance hosted on another vlan?

    W
    Forum|alt.badge.img+8
    • wyip
    • New Contributor
    • September 16, 2013

    I know its an old thread, but just in case anyone ends up here because they were searching for some info here's the bless command that I'm using to netboot to my NetSUS v2.0 hosted 10.8 netboot set:

    /usr/sbin/bless --netboot --booter "tftp://${server}/${setName}/i386/booter" --kernelcache "tftp://${server}/${setName}/i386/x86_64/kernelcache" --options "rp=http://${server}/NetBoot/NetBootSP0/${setName}/NetBoot.dmg" -nextonly

    Replace "${server}" with the IP address of your NetSUS appliance, and "${setName}" with the name of your NBI.

    D
    Forum|alt.badge.img+11
    • dmw3
    • Valued Contributor
    • September 17, 2013

    Just came across this thread. Yes we are running a NetSUS appliance under VSphere. We can upload images ok but cannot find a way to actually enable NetBoot, no matter what we do the service does not start just sits there with a red dot.

    Version 2.0 of JAMF ASUS on Redhat 6.4

    SUS part of the appliance on the same server works well, just not NetBoot.

    W
    Forum|alt.badge.img+8
    • wyip
    • New Contributor
    • September 17, 2013

    Make sure you've added the subnet that your NetSUS is on into the netboot settings. You won't be able to enable Netboot unless the NetSUS is configured to listen on its local subnet for some reason.

    Terms & ConditionsCookie settingsAccessibility statement