Jamf Remote Assist Issues

ooshnoo
Valued Contributor

Anyone here using the new Jamf Remote Assist?  I’ve gotten it to work a few times but it always fails now saying the cmoputer is not registered.  Then when I click the "Reregstier App button", the installation of the Jamf Remote Assist PPPC Profile always fails.

I realize the feature is in its infancy, but would still like to leverage it.

12 REPLIES 12

jamf-42
Valued Contributor II

as per other posts.. tested.. its bobbins.. (other words are available) I'll visit again in 6 months when it works.. 

AJPinto
Honored Contributor III

I'm not even going to bother trying to test it for a few months. The controls, and monitoring are not anywhere where they need to be for it to be viable. That and JAMF kinda snuck it out the door with minimal documentation. So, ya I'll get to it later. 

bfrench
Contributor III

so many issues so little time - will check it again after an update or 2....

JamfAdmin04
New Contributor

Earlier it was working and now its not connecting and end up with an error "Cannot connect to end user computer. Make sure the computer is online and try again.". Any specific settings to be consider from network side.

obi-k
Valued Contributor III

Checked off the box in Jamf Settings and deployed the profile. Could never remote into another Mac. Believe I got a register error. Sticking with ARD and ScreenSharing.

raymondap
Contributor

Same here, we're excited to hopefully ditch Teamviewer but looks like we need to wait, it doesn't work at the moment.

bmack99
Contributor III

any updates on this? I am hoping to be able to ditch Teamviewer soon as well but am getting the computer is not registered errors after enabling Remote Assist.

Jamf1
New Contributor

What if you manually installed with the pkg Jamf Remote Assist (/Library/Application Support/JAMF/Jamf.app/Contents/MacOS/JamfDaemon.app/Contents/Resources) ?
Can you try on an other network ?

jcx9228
New Contributor III

After Teamviewer fiasko with a hack we refused to use this tool and switched to jamf remote assist . We experience some connection issues and would like to ask your help to figure them out .
I turned this one as per jamf documentation . i can see couple of profiles were installed to my Mac . At first connection did not work giving error about missing app and registration . So i re - installed the app and sent register command . Later it started to work on my test machines were i did the same . For my colleague ( another jamf admin ) it started to work after couple of attempts. Did not need any troubleshooting.
I gave permissions to out helpdesk and support Team to use this , but for them this does not work at all . Connection just spins without giving any errors . At first i was thinking it may have something to do with jamf users permissions so i gave myself helpdesk permissions and tested it out . It worked - so i ruled this out .

any suggestions what to try ?

ManagerofVibes
New Contributor III

I can too agree with your post. It did work maybe three times for me in the beginning of 2024, now that we are all on MDM and need assistance, I as an admin cannot remote in through Jamf. It's now September 2024 and the issue is still ongoing. I hope this can get resolved soon. We'd also like to utilize this feature!

st02264
New Contributor

JAMF assist pppc seems to be broken, unable to establish a connection with a device already in the fleet.

rtarson
New Contributor II

Good looks like I am not the only one not being able to get a solid working concept of the jamf remote assist. Probably why they buried it in the management tab. Its just talking point for sales.