Self Service and Authentication

Hi John,

I've seen this happen too, however only for 1 or 2 workstations, so I didn't spend much time on it. Would be interested in the cause if you find out.

For those workstations, we ran recon again, cleared cache, re-opened self service and was ok.

Lisa.

Lisa Davies
ICT Client Services Manager
Saint Ignatius' College, Riverview
Phone: 02 9882 8413
Mobile: 0417 005 735

This happens when the management account's password in inventory does not match the password on the machine. This just happened to me the other day. I made sure both passwords were the same and ran a recon. No more prompt for password.

Thanks
Allen

Yep this is totally the answer. Self Service is going to try whatever account you have for management first. If the JSS's stored password and the actual local password don't line up, it'll prompt interactively for admin credentials.

You'll most often see this if you have a policy set to spin your admin account's password at some regular basis. Every now and again they won't line up.

Hi Allen,

This was the exact issue and fixed it!

Thanks very much for your help.

Lisa, Hope this helps you :)

Regards,
John

--

John Szaszvari
Network Manager | Monte Sant' Angelo Mercy College
02-9409-6281 | jszaszvari at monte.nsw.edu.au | 128 Miller St, North Sydney

If the above suggestions don't work. Make sure date and time is the same on the server as it is on the client machines.

If the above suggestions don't work. Make sure date and time is the same on the server as it is on the client machines.