Snagit 2019

bmichael
New Contributor III

Has anyone deployed Snagit 2019 with the license key? Ive tried using composer and installing snagit, activating it then creating the package but so far I havent had any luck doing it that way.
Any Suggestions?

13 REPLIES 13

talkingmoose
Moderator
Moderator

I use Snagit myself but haven't had a need to deploy it, however, I believe activation requires online connectivity to communicate with TechSmith's activation servers. If that's the case, then there's probably not a file you can deploy to other systems after activation. It would likely be tied to the hardware of the device and not be transferrable.

You might reach out to TechSmith and ask for a solution for mass deployment from a centralized location to see what they offer.

TJ_Edgerly
New Contributor III

From my experience (but i have not done 2019 yet), Snag It is just looking for the Activation Key in a specific file path and then send to their servers (does require online connectivity). I just add the PKG from their website and just deploy the key as a separate PKG or DMG in my policy to the necessary location (see screen shot).

dc52336db9014ebe80a9fbe7ef1719a1

mconners
Valued Contributor

Agree with @TJ.Edgerly on this. We do the same thing for SnagIt.

bmichael
New Contributor III

@TJ.Edgerly So I used composer and created a pkg for the snagit application and a separate pkg for the users/shared/techsmith/snagit with the Snagitregistrationkey file in it. I create a policy in Jamf pro containing the both pkgs then I install it on my test machine from Self Service and when I open Snagit it still asks for the license key or start trial. So I tried to just run the registrationkey file but didnt have permissions it said. So I went back and made the pkg for the registrationkey and edited the permissions for that and changed the owner. Now it works properly. Thanks for the help!

Heavy_D
Contributor III

Wouldn't you be able to compile this in one package as apposed to two?
6c3b3325d81d4adc9ccc19d69b66e07f

I created a package with the installer and the key in one package I have not tested it though just theory crafting.

rtrouton
Release Candidate Programs Tester

There's an AutoPkg recipe for SnagIt, which includes the option to add the license code to the installer via an AutoPkg override:

https://github.com/autopkg/bkerns-recipes/tree/master/TechSmithSnagit

rqomsiya
Contributor III

Has anyone successfully deployed snagit 2020 PPPC?

roiegat
Contributor III

Also wondering if anyone has done the Snagit 2019 PPPC?

kcsantos
New Contributor III

I can't figure out how to get the Audio Capture Engine (ACE) component to automatically install as well. Anyone find a way to do this?

dmorgan_ISC
New Contributor II

Can someone please help me with the autopkg and applying the snagit key. I am very new to this, and don't know much about anything. I can create the package with autopkg fine, but i am not sure how to apply the reg key as per:
*To use SNAGIT_KEY, create an override and add the key value. The needed key value can be pulled from a machine that has already been registered with the following:

cp /Users/Shared/TechSmith/Snagit/SnagitRegistrationKey /Users/Shared/TechSmith/Snagit/SnagitRegistrationKey.plist
defaults read /Users/Shared/TechSmith/Snagit/SnagitRegistrationKey.plist RegKey | sed 's/[<> ]//g'*

I tried editing the override file to add the key provided by snagit it to : here:
<dict> <key>NAME</key> <string>TechSmithSnagit</string> <key>SNAGIT_KEY</key> <string>xxx</string>

But that didn't generate the Snagitregistrationkey in the /Users/Shared dir when i installed the package.

The command cp /Users/Shared/TechSmith/Snagit/SnagitRegistrationKey /Users/Shared/TechSmith/Snagit/SnagitRegistrationKey.plist
defaults read /Users/Shared/TechSmith/Snagit/SnagitRegistrationKey.plist RegKey | sed 's/[<> ]//g'
shows {length=60, bytes=0xfffxxxx...30434} and not sure how that then needs to be applied to the overwrite file.

Any help would be greatly appreciated.

tonymuni
New Contributor II

I have Snagit 2020 deployed to my end users devices, they are not admins. Build one Package in Composer with the Snagit installer and your license key, Build a second Package for ACE. You can download the installer here, https://assets.techsmith.com/Downloads/TechSmith-Record-System-Audio-Installer.app.zip, and use composer to Snapshot the install. Then bundle that with your policy to install your Snagit app with a higher priority so it installs before Snagit. Create a PPPC for Snagit and Snagit Helper. Force a restart after success of the entire policy and you are good to go. Enjoy.

sendhil103
New Contributor

@tonymuni do you have idea on creating the snagit 2021 pkg and PPPC ?

naya
New Contributor II

@sendhil103 this is the updated installation advice by Snagit https://support.techsmith.com/hc/en-us/articles/115007344888-Enterprise-Install-Guidelines-for-Snagit-on-MacOS