Wacom Tablet Packaging??

Not applicable

Hi Folks,

We are trying to deploy our Wacom Tablet software/driver to our Macs and I cannot find a way to install it either in a configuration using Casper Admin or remotely using Apple Remote Desktop. Anyone successful in packaging a Wacom tablet software/driver? If so, can you shout back at me and please tell me your secret?

Thanks everyone!

Mick

27 REPLIES 27

bentoms
Release Candidate Programs Tester

I just chuck the wacom intuos.pkg into Casper admin & deploy that.

Regards,

Ben.

Not applicable

We have had good luck with a Composer snapshot install and a reboot of the target computer once installed.
So far so good for Intuos and Bamboo deployments.
Where are you running in to challenges?

Nick Caro Senior Desktop Support Administrator

Not applicable

I believe we used composer and were able to install via policies.

Sent from my iPhone

Not applicable

Interestingly, when I install it either method, Casper or ARD, the package appears to have installed. When a tablet is plugged in and someone opens the system preference to manage the tablet, an error message pops up and asks me to restart or reload the driver. This is SOOO frustrating with everything else working. I called Wacom and they had really no experience with enterprise deployment and the best practice.

Everything else I have packaged works like a charm.

Maybe, I will try and older driver for 10.6?

Mick

Not applicable

You need to either reboot or create a script to start their services.

# via iPhone

bentoms
Release Candidate Programs Tester

I cannot advise as I install mine as part of my image.. So it's always restarted once installed.

Regards,

Ben.

Not applicable

Thank you for your quick responses. I repackaged the installer and deployed it to a test Mac. After restarting, it appears to now be working. I am going to run with this version….

Once again, you are all great, whether I am reading your posts or interacting with you!

Thank you!!

Mick

Not applicable

Wacom Table 6.3.3.-3 doesn't work from Casper 8.6; tried AFP vs HTTP, cache then install, etc:

Installation failed. The installer reported: Begin Installation Check
theArchictectureType = 7

End Installation Check

Noticed that Composer 8.6 had some trouble packaging this as well. Anyone notice anything with this version?

donmontalvo
Esteemed Contributor III

Installing on PPC?

--
https://donmontalvo.com

Not applicable

Nope, attempting to install on iMac and Mac Pro, all 10.6.8. Same issue if attemtping at logout. Tablet connected during install too.

donmontalvo
Esteemed Contributor III

We've never had to repackage any of the Wacom drivers before. I'm happy to test in our LAB environment, since if there is an issue it will effect us at some point. Do you have a direct download link for that driver? If not, can you put the driver on my DropBox folder (check your email)?

Don

--
https://donmontalvo.com

etippett
Contributor II

I'm having issues installing 6.2.0w4 (http://cdn.wacom.com/U/drivers/mac/pro/WacomTablet_6.2.0w4.dmg) using Casper 8.52. I pulled the .pkg out of the .dmg and uploaded that to my JSS. The policy is set to install it for any trigger. It seems to be an issue with the postflight script, as evidenced by this line: "Can't call method "localizations" on unblessed reference at /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources/postflight line 168."

Of course I'm not well-versed in perl, so if anyone can provide some help, that would be great. I had a hunch that it has to do with the fact that the original DMG also contains localization files that are missing during the Casper install. However, if I manually issue the terminal command `sudo jamf policy` the installation succeeds, so now I'm not so sure.

Here are the logs from installer:

Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Set authorization level to root for session
Aug 27 17:40:20 kh219-101-m7c2a runner[5626]: Administrator authorization granted.
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Will use PK session
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Starting installation:
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Configuring volume "Macintosh HD"
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Preparing disk for local booted install.
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Free space on "Macintosh HD": 120.08 GB (120075313152 bytes).
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Create temporary directory "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//Install.5622nvvjwI"
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: IFPKInstallElement (1 packages)
Aug 27 17:40:20 kh219-101-m7c2a installer[5622]: Using authorization level of root for IFPKInstallElement
Aug 27 17:40:20 kh219-101-m7c2a installd[5627]: PackageKit: ----- Begin install -----
Aug 27 17:40:20 kh219-101-m7c2a installd[5627]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
Aug 27 17:40:20 kh219-101-m7c2a installd[5627]: PackageKit: packages=( "PKJaguarPackage <file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg>" )
Aug 27 17:40:20 kh219-101-m7c2a installd[5627]: PackageKit: Will do receipt-based obsoleting for package identifier com.wacom.installwacomtablet (prefix path=)
Aug 27 17:40:20 kh219-101-m7c2a installd[5627]: PackageKit: Extracting file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Aug 27 17:40:22 kh219-101-m7c2a installd[5627]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: PackageKit: Executing script "./preflight" in /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: Begin preflight
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: Relaunch Dameon not running.:
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: Control Panel not running.:
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: Tablet Driver not running.:
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: Unloading KEXT:
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: (kernel) Kext com.Wacom.iokit.TabletDriver not found for unload request.
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: Failed to unload com.Wacom.iokit.TabletDriver - (libkern/kext) not found.
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: (kernel) Kext com.wacom.kext.wacomtablet not found for unload request.
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: Failed to unload com.wacom.kext.wacomtablet - (libkern/kext) not found.
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: ./preflight: End Preflight
Aug 27 17:40:27 kh219-101-m7c2a installd[5627]: PackageKit: Shoving /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root (4 items) to /
Aug 27 17:40:28 kh219-101-m7c2a installd[5627]: PackageKit: kextcache -system-caches
Aug 27 17:40:30 kh219-101-m7c2a installd[5627]: PackageKit: kextcache -update-volume / -Installer
Aug 27 17:40:30 kh219-101-m7c2a installd[5627]: kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
Aug 27 17:40:49: --- last message repeated 2 times ---
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: PackageKit: Executing script "./postflight" in /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: ./postflight: Can't call method "localizations" on unblessed reference at /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources/postflight line 168.
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: ./postflight: Begin postflight.
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: ./postflight: Postflight running from /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources on 1074
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: ./postflight: WacomMultiTouch.framework source version = 10100; destination version = 10101
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: ./postflight: Existing touch API was newer.
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: ./postflight: loading manifest
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: ./postflight: login name = student
Aug 27 17:40:49 kh219-101-m7c2a installd[5627]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “Install Wacom Tablet.pkg”." UserInfo=0x7fc10c01de10 {NSFilePath=./postflight, NSURL=file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg, PKInstallPackageIdentifier=com.wacom.installwacomtablet, NSLocalizedDescription=An error occurred while running scripts from the package “Install Wacom Tablet.pkg”.} { NSFilePath = "./postflight"; NSLocalizedDescription = "An error occurred while running scripts from the package U201cInstall Wacom Tablet.pkgU201d."; NSURL = "file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg"; PKInstallPackageIdentifier = "com.wacom.installwacomtablet"; }
Aug 27 17:40:49 kh219-101-m7c2a installer[5622]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “Install Wacom Tablet.pkg”." UserInfo=0x7fd12a6268d0 {NSFilePath=./postflight, NSURL=file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg, PKInstallPackageIdentifier=com.wacom.installwacomtablet, NSLocalizedDescription=An error occurred while running scripts from the package “Install Wacom Tablet.pkg”.}
Aug 27 17:40:50 kh219-101-m7c2a installer[5622]: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.

Here are the logs from an installation forced with `sudo jamf policy`

Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Set authorization level to root for session
Aug 27 17:48:54 kh219-101-m7c2a runner[1304]: Administrator authorization granted.
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Will use PK session
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Starting installation:
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Configuring volume "Macintosh HD"
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Preparing disk for local booted install.
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Free space on "Macintosh HD": 119.92 GB (119922954240 bytes).
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Create temporary directory "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//Install.13006EwLJI"
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: IFPKInstallElement (1 packages)
Aug 27 17:48:54 kh219-101-m7c2a installer[1300]: Using authorization level of root for IFPKInstallElement
Aug 27 17:48:54 kh219-101-m7c2a installd[1305]: PackageKit: ----- Begin install -----
Aug 27 17:48:54 kh219-101-m7c2a installd[1305]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
Aug 27 17:48:54 kh219-101-m7c2a installd[1305]: PackageKit: packages=( "PKJaguarPackage <file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg>" )
Aug 27 17:48:54 kh219-101-m7c2a installd[1305]: PackageKit: Will do receipt-based obsoleting for package identifier com.wacom.installwacomtablet (prefix path=)
Aug 27 17:48:54 kh219-101-m7c2a installd[1305]: PackageKit: Extracting file://localhost/Library/Application%20Support/JAMF/Downloads/Install%20Wacom%20Tablet.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Aug 27 17:48:56 kh219-101-m7c2a installd[1305]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: PackageKit: Executing script "./preflight" in /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: Begin preflight
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: Relaunch Dameon not running.:
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: Control Panel not running.:
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: Killing Tablet Driver: 436 523
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: Unloading KEXT:
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: (kernel) Kext com.Wacom.iokit.TabletDriver not found for unload request.
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: Failed to unload com.Wacom.iokit.TabletDriver - (libkern/kext) not found.
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: (kernel) Kext com.wacom.kext.wacomtablet not found for unload request.
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: Failed to unload com.wacom.kext.wacomtablet - (libkern/kext) not found.
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: ./preflight: End Preflight
Aug 27 17:49:05 kh219-101-m7c2a installd[1305]: PackageKit: Shoving /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root (4 items) to /
Aug 27 17:49:06 kh219-101-m7c2a installd[1305]: PackageKit: kextcache -system-caches
Aug 27 17:49:08 kh219-101-m7c2a installd[1305]: PackageKit: kextcache -update-volume / -Installer
Aug 27 17:49:09 kh219-101-m7c2a installd[1305]: kextcache: JMicronATA.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
Aug 27 17:49:29: --- last message repeated 2 times ---
Aug 27 17:49:28 kh219-101-m7c2a installd[1305]: PackageKit: Executing script "./postflight" in /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Use of uninitialized value in concatenation (.) or string at /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources/postflight line 200.
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Begin postflight.
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Postflight running from /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources on 1074
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: WacomMultiTouch.framework source version = 10100; destination version = 10101
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Existing touch API was newer.
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: loading manifest
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: login name = root
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: - Language: English ....... done.
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Begin copy from /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources/../../../ to /Applications/Wacom Tablet.localized
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: File /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources/../../..//Read Me .rtf not found
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: File /Library/Application Support/JAMF/Downloads/Install Wacom Tablet.pkg/Contents/Resources/../../../../Tutorial.app not found
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: File /tmp/User's Manual.pdf not found
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Remove TabletDriver from System Login items
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Re-enumerating tablets - please stand by
Aug 27 17:49:29 kh219-101-m7c2a installd[1305]: ./postflight: Opening TabletDriver
Aug 27 17:49:30 kh219-101-m7c2a installd[1305]: PackageKit: Writing receipt for com.wacom.installwacomtablet to /private/var/db/receipts
Aug 27 17:49:30 kh219-101-m7c2a installd[1305]: PackageKit: Registered bundle file://localhost/Applications/Wacom%20Tablet.localized/Wacom%20Tablet%20Utility.app/
Aug 27 17:49:30 kh219-101-m7c2a installd[1305]: PackageKit: Registered bundle file://localhost/Library/Application%20Support/Tablet/WacomTabletDriver.app/
Aug 27 17:49:30 kh219-101-m7c2a installd[1305]: PackageKit: Registered bundle file://localhost/Library/Application%20Support/Tablet/WacomTabletDriver.app/Contents/Resources/TabletDriver.app/
Aug 27 17:49:30 kh219-101-m7c2a installd[1305]: PackageKit: Registered bundle file://localhost/Library/Application%20Support/Tablet/WacomTabletDriver.app/Contents/Resources/WacomTouchDriver.app/
Aug 27 17:49:30 kh219-101-m7c2a installd[1305]: Installed "Wacom Tablet" ()
Aug 27 17:49:30 kh219-101-m7c2a installd[1305]: PackageKit: ----- End install -----
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: Removing temporary directory "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/T//Install.13006EwLJI"
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: Finalize disk "Macintosh HD"
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: Notifying system of updated components
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: ** Summary Information **
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: Operation Elapsed time
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: -----------------------------
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: zero 0.01 seconds
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: disk 0.01 seconds
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: install 37.15 seconds
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: -total- 37.17 seconds
Aug 27 17:49:31 kh219-101-m7c2a installer[1300]: bash-3.2$

hbon
New Contributor

Im having the same issue. DMG can be downloaded from the Wacom site:
http://www.wacom.com/en/support/drivers
WacomTablet_6.3.5w3
I've tried dropping the DMG into Casper Admin and making it available in Self Service. After it runs, Self Service says its successful but its not available in System Prefs- Didnt work.
I've tried dropping the original pkg (that was in the DMG) in Casper Admin and again making it available in Self Service. It flat out fails.
Ive tried packing up the DMG in Composer and it just placed the pkg on the System drive. I tried repackaging the pkg and it says its successful but its not available in System Prefs. False positive again.
Closest I got was doing snap shot in Composer but ended up with error in System Prefs under the Wacom tab "Error with driver you may need to restart or reinstall your driver" After a restart, it still did not work. Anyone find the trick with this yet? Installing the downloaded pkg manually, works perfectly.
Thanks!

Hilary

tkimpton
Valued Contributor II

I have this problem but it wasnt always this difficult, In the past i used a composer capture but not so much luck this time around.

I've just put the pkg in Self Service. If people want it I just tell them it's in Self Service.

Thinks I will try again its been quite some time!

Kumarasinghe
Valued Contributor

I have packaged;
Wacom-PenTablet-Bamboo-5.2.6-5 and Wacom-Tablet-Intuos2-6.2.0w4
with the Snapshot method and all good.

You need to Snapshot it as Wacom driver pkg files need a user to be logged in to install. So Snapshot it to overcome this issue.

If you package multiple Wacom drivers, you have to Snapshot all the drivers at once (one package with all the drivers and wacom apps). Drivers and Wacom Apps don't work If you snapshot each driver and installs it separately.

Then Upload it to Casper Admin with "FUT" and "FEU" selected.

donmontalvo
Esteemed Contributor III

@hbon wrote:

Im having the same issue. DMG can be downloaded from the Wacom site: http://www.wacom.com/en/support/drivers WacomTablet_6.3.5w3 I've tried dropping the DMG into Casper Admin and making it available in Self Service. After it runs, Self Service says its successful but its not available in System Prefs- Didnt work. I've tried dropping the original pkg (that was in the DMG) in Casper Admin and again making it available in Self Service. It flat out fails. Ive tried packing up the DMG in Composer and it just placed the pkg on the System drive. I tried repackaging the pkg and it says its successful but its not available in System Prefs. False positive again. Closest I got was doing snap shot in Composer but ended up with error in System Prefs under the Wacom tab "Error with driver you may need to restart or reinstall your driver" After a restart, it still did not work. Anyone find the trick with this yet? Installing the downloaded pkg manually, works perfectly. Thanks! Hilary

I doubt dropping a vendor provided DMG containing package installers into JSS is going to work. :) We've never had problems deploying Wacom PKG/MPKG installers, but if we did, we'd use a wrapper to deploy their PKG/MPKG to /private/tmp and trigger with a postflight script.

@Kumarasinghe wrote:

I have packaged <insert-random-application-here> with the Snapshot method and all good.

Whenever I hear the term "snapshot" I can't help but cringe. There's a reason all that complex logic exists in vendor packages. ;)

Don

--
https://donmontalvo.com

tkimpton
Valued Contributor II

Sorry forgot to mention I used wrapper like Don and put it in Self Service. No need to make things hard for yourself ;)

acdesigntech
Contributor II

There's some weird ish going on with 10.8.x and Wacom intuos drivers in our environment. Our creative division has a huge fleet of Intuos 1s and 2s, so I can't just deploy the newest driver - 6.3.4 something or other I think. Only supports the 3 4 and 5.

However it seems like the older driver installers, 6.1.5-2 6.2.0-w4 in particular, downright refuse to install as part of a policy, continually failing on one of the postflight routines. What gives? I don't know. I hear it has something to do with how Intuos deals with kernel extensions and how 10.8 looks at intuos installs now. Haven't confirmed that though.

Given that my hands are tied with having to support legacy equipment I can't install higher than the 6.2.0-w4 driver. However since it fails during policy (works through Casper Remote just fine), I ended up repackaging it into a .dmg. This way it just forces the driver and kext file onto the system. Screw you installd...

franton
Valued Contributor III

I think we just snapshotted it ...

etippett
Contributor II

I just fought this same issue for several days and finally came across this thread (https://jamfnation.jamfsoftware.com/discussion.html?id=7357). What timsutton mentions is the key. Here's how I got it working:

  1. Open the DMG from Wacom and upload the "Install Wacom Tablet.pkg" into Casper Admin
  2. Setup a policy to cache the package and then add on the Advanced tab to run the command 'export USER=root; installer -pkg /Library/Application Support/JAMF/Waiting Room/Install Wacom Tablet.pkg -tgt / -verbose'

Happy trails,
Eric

ImAMacGuy
Valued Contributor II

maybe JAMF should put in some form of verification that the accounts on JN are legit.

dpertschi
Valued Contributor

ImAMacGuy
Valued Contributor II

yes, there's that, but I was referring to a preventative measure.

jake
Contributor II
Contributor II

@jwojda - we're on it. There will be additional checks in place in the near future. Fortunately we don't get too much SPAM, but when we do, we appreciate everyone who notifies us.

Look
Valued Contributor III

We snapshotted it as well, the .pkg directly out of Casper just wasn't getting it done.

RobertHammen
Valued Contributor II

Deploying this via Self Service with the EXPORT USER=root workaround listed by @etippett here.

ImAMacGuy
Valued Contributor II

@etippett 's workaround worked for me too.
thank you!