@HelpDeskWarrior Hi Rob

In the JSS web page go to Computers -> Management Settings -> Computer Management -> Directory Bindings. You should be able to see the configured AD binding in there. I'd also suggest checking the /var/log/jamf.log on an imaged machine, or even the Imaging log in the JSS for a device to see what the error is when the binding is attempted.

@HelpDeskWarrior As @plawrence says, check the log... the where is important, as in where in the imaging process is the binding being attempted?

We do ours post imaging AFTER setting the time, if you try at run the binding when the client is netbooted it will fail.

FWIW, my workflow is: here.

@HelpDeskWarrior If you are using a thunderbolt to ethernet adapter the bind will always fail.This is a known issue and has to due with Apple and not JAMF. I do mine post imaging as @bentoms suggests.

@RogerUL

This has worked perfectly for me for imaging laptops. I have it run as a first run, reboot script.

#CHECK TO SEE IF IMAGING LAPTOP

#This checks for Thunderbolt or USB over Ethrnet.



#!/bin/sh

# Checks to see if the Mac is either a MacBook Pro Retina or MacBook Air

# If it's either of these machines, the script will then check for External Network Adapters

# If either adapter is present, it will add the adapter to network services

# Resolves the annoying issue with USB & Thunderbolt Ethernet adapters with Casper Imaging



mbpr=`system_profiler SPHardwareDataType | awk '/Model Identifier/{print $3}' | cut -f1 -d ","`

mba=`system_profiler SPHardwareDataType | awk '/Model Identifier/{print $3}' | cut -c-10`

usbAdapter=`/usr/sbin/networksetup -listallhardwareports | grep "Hardware Port: USB Ethernet"`

tbAdapter=`/usr/sbin/networksetup -listallhardwareports | grep "Hardware Port: Thunderbolt Ethernet"`



/usr/sbin/networksetup -detectnewhardware



if [[ $mbpr = "MacBookPro10" ]] || [[ $mbpr = "MacBookPro11" ]] || [[ $mbpr = "MacBookPro12" ]]|| [[ $mbpr = "MacBookPro13" ]]|| [[ $mbpr = "MacBookPro14" ]]|| [[ $mbpr = "MacBookPro15" ]]; then

    if [ "$usbAdapter" != "" ]; then

        /usr/sbin/networksetup -createnetworkservice USB Ethernet 'USB Ethernet'

        echo "USB Ethernet added to Network Services"

    else

        echo "No USB Adapter connected"

    fi

    if [ "$tbAdapter" != "" ]; then

        /usr/sbin/networksetup -createnetworkservice Thunderbolt Ethernet 'Thunderbolt Ethernet'

        echo "Thunderbolt Ethernet added to Network Services"

    else

        echo "No Thunderbolt Adapter connected"

    fi  

elif [ $mba = "MacBookAir" ]; then

    if [ "$usbAdapter" != "" ]; then

        /usr/sbin/networksetup -createnetworkservice USB Ethernet 'USB Ethernet'

        echo "USB Ethernet added to Network Services"

    else

        echo "No USB Adapter connected"

    fi

    if [ "$tbAdapter" != "" ]; then

        /usr/sbin/networksetup -createnetworkservice Thunderbolt Ethernet 'Thunderbolt Ethernet'

        echo "Thunderbolt Ethernet added to Network Services"

    else

        echo "No Thunderbolt Adapter connected"

    fi

else

    echo "This machine does not use external network adapters"    

fi



exit 0

Thanks for all the insights...learning at a logarithmic rate!!

@RogerUL I've never seen a fail with binding and adaptors. What OS have you seen this on? Are you using Apple or 3rd party adaptors? Do you use Casper's built-in tool for binding? We only have a few machines that would require an adaptor, but mine is one of them and I'm pretty sure I'd have noticed that one :)