Posted on 05-09-2016 09:48 AM
Sorry for the obvious but I just setup my NetSUS 4.0 appliance recently using the OVA and was curious how I go about applying the 4.1.0 update. The run file seems to be for the 4.0.0 version and I can work my way around the shell well enough I'm just not sure how to apply the zip package from Git and I did not see instructions for updating in the readme file.
Any help is greatly appreciated!
Posted on 05-10-2016 12:22 PM
@McDonald where do you see the 4.1.0 update? I went to the NetSUS github and see nothing mention about NetSUS 4.1.0
Posted on 05-10-2016 12:25 PM
Got an email update from JAMF about it. https://github.com/jamf/NetSUS/releases/tag/4.1.0
Posted on 05-10-2016 01:15 PM
Interesting hopefully they are fixing the issue where you cant login to the web interface if the hard drive gets too full.
Posted on 05-11-2016 07:08 AM
I found the instructions here to upgrade...
Replace the step for the file to download to https://github.com/jamf/NetSUS/archive/4.1.0.zip
Then install an unzip app (sudo apt-get install unzip)
Unzip 4.1.0 file
Run sudo ./CreateNetSUSInstaller.sh which will create the NetSUSLPInstaller.sh
Run sudo ./NetSUSLPInstaller.sh
You will be prompted to answer some questions during the upgrade process. After that I rebooted the NetSUS server and connected to the web page. It's a nice GUI update.
Posted on 05-11-2016 07:01 PM
Fantastic! Thanks @rmiltenb!
For anyone else that goes through this I combined steps from the other post plus ones above as follows:
Posted on 05-18-2016 07:53 AM
This update is the greatest thing since the JSS. I feel like I'm on a site from this decade!
Posted on 05-25-2016 01:17 AM
The only thing that needs to be done is update the product page which still points to the 4.0.0 version
Posted on 05-25-2016 08:29 AM
Netsus is not taking down all the updates off el capitan.
You have to change the following file: /var/lib/reposado/preferences.plist
and add the bottom lines:
<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>CurlPath</key> <string>/usr/bin/curl</string> <key>LocalCatalogURLBase</key> <string></string> <key>UpdatesMetadataDir</key> <string>/srv/SUS/metadata/</string> <key>UpdatesRootDir</key> <string>/srv/SUS/html/</string> <key>AppleCatalogURLs</key> <array> <string>http://swscan.apple.com/content/catalogs/others/index-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog</string> <string>http://swscan.apple.com/content/catalogs/others/index-10.10-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog</string> <string>http://swscan.apple.com/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog</string> </array> </dict> </plist>
with this all old updates are also gone and you have more space ;)
Posted on 05-25-2016 08:47 AM
Posted on 05-31-2016 05:28 PM
Has anyone has issues with the SMB upload? It just hangs when I try to connect with Finder. The smb conf seems fine and prior to this update, it worked perfectly.
Posted on 06-01-2016 12:13 AM
No problem at all, from witch version you upgraded from? (mine 3.0.2 to 4.1.0)
Posted on 06-01-2016 11:11 AM
I upgraded from 4.0.0 to 4.1.0. It turns out I had to uninstall samba before rerunning the .run file with:
sudo apt-get autoremove samba samba-common
sudo apt-get autoremove system-config-samba