Remove Self Service Web Clip

Lucasder
New Contributor III

We are setting up the use of JAMF Parent for our student iPads that go home each night. Since we started using JAMF, we only used the self-service web clip and need to get the self-service app on all of our devices, around 1,000 of them. While testing, we did the following workflow- GO to settings> self-service iOS and change it too Self Service App and uncheck the box below that says allow web clip access to remove the current Self-service web clip.
This removes the web clip, and when it attempts to install the self-service App, it asks for iTunes ID, which we do not use.

If we instead install the self-service app via mobile device apps, with our App configuration, while the web clip is still on the iPad it will install the app with no problem, then we click and change the settings> self-service iOS and change it too Self Service App and uncheck the box below that says allow web clip access to remove the current Self-service web clip. This all works perfectly in a test environment because we can see that they have all installed the new self-service before changing the settings.

In the real world, we do not know when all of them have completed this to change the settings. So how can we remove the web clip, install the self-service app with our configuration and have it not ask for an iTunes ID

15 REPLIES 15

alab
New Contributor II

to install Self Service App without the need of Apple ID, you need to deploy it using VPP content. Then do the App Config, follow the link below
https://www.jamf.com/jamf-nation/articles/370/title

Lucasder
New Contributor III

@alab I appreciate the response, but that is how we are sending out the self-service app. The issue is the ability to remove the self-service web clip from all of the devices after installing our configured self service app.

jared_f
Valued Contributor

@Lucasder Is your webclip stored in a configuration profile scoped to devices? If so, create a smart group of devices that have App Name LIKE Self Service. Add that Smart Group as an exclusion to the webclip profile! Once the app installs and an inventory update is done the webclip will remove itself!

Lucasder
New Contributor III

No the Self Service Web clip is created by the JSS, not by us. So we don't have something to use to pull it back

jared_f
Valued Contributor

@Lucasder I would push the Self Service app and once it is fully deployed, pull back the Web Clip.

Create a profile with the Web Clip and scope to a smart group of devices that do not have Self Service.app as a backup.

Lucasder
New Contributor III

Jared I appreciate the response but again your thinking of webclips that we create this is not something we create a profile for or anything like that. it is generated by the JSS. Thanks Ive contacted support

larry_barrett
Valued Contributor

cdf0bd838e634893a35d7973545ac7e8

e6e09cb0d5284a4db7917a0fe0cef9c9

3fea75b2f6224a8093de5b6837f1f12f

7316ea0df13f45aba51bcdb6710abacd

cdenesha
Valued Contributor III

@Lucasder The only thing you are missing is to purchase free licenses from VPP for Self Service, and edit the app to use the licenses as device licenses (VPP -> Assign VPP Content) (scope the app to All Devices). This will remove the prompt for iTunes. Also, you do need to choose 'Neither' for automatically assigning Self Service like the picture in the previous post, so the web clip comes off.

Lucasder
New Contributor III

larry_barrett- Correct that's what should work but it does NOT remove the webclip

cdenesha- No were not missing that, as stated before it works with VPP just fine and we have the licenses etc. the itunes prompt appears if it does not already have the self service app via VPP and niether does not remove the webclip.

larry_barrett
Valued Contributor

@Lucasder Can you post a screen shot of your MDM Profile on/from the iPad in question? Make sure to black out any site identifying info.

Lucasder
New Contributor III

I spoke with support yesterday and we came to the conclusion this is a product issue. In the screenshot, you can see it is set to neither, and below it the box is checked for "allow self-service web clip access." That checkbox is the issue, even if you uncheck it and then save it will remain checked and not remove the web clip version of self-service. 838c54cc4e594fe090b07fa35a1cee61

brauden
New Contributor

We do have the exact same issue. Have they said if this will be fixed in an upcoming release?

ryan_ball
Valued Contributor

@Lucasder I've seen the same thing in the past, and Support gave me an SQL command to run which would create a management command that removes the Web Clip profile by ID.

brauden
New Contributor

@ryan.ball

Can you share that command so others are able to fix their environments?

ryan_ball
Valued Contributor

@brauden I don't have the command any longer, this was a while back. Unfortunately, I probably would also not share that, as you contact Jamf Support about the issue and work with them to provide the necessary commands for you.

Essentially though, it you identified the profile by ID, and for each device that had a profile with that ID, you created a management command that would remove that profile ID. You started with a command that would impact only one test device, then after that was successful a command that would impact all devices with that profile.

I encourage you to create a Jamf Support ticket, as they will be able to assist you best.