Posted on 04-29-2013 10:21 AM
I remember that even though you could sync a wireless and the Casper Enrollment profile with Configurator, you still had to tap the screen a bunch of times to accept and allow the profiles to be used AND even more taps if the devices were new. This in turn caused timeout issues with multiple iOS devices. Is this still the case?
I'll admit we haven't looked at the Configurator in a while, but looking at Casper Focus and the need to use Supervise in Configurator thought I would ask.
Patrick
Solved! Go to Solution.
Posted on 04-29-2013 10:32 AM
This is still the case. To avoid this, set up one ipad and clear all the setup screens. Right-click on the ipad in configurator and make a backup. Put that backup on your other ipads and all the setup screens will be cleared. Warning - doing this on an ipad will erase all personal data from the ipad, so do this on new ipads, not ipads that are already assigned to users.
Posted on 04-29-2013 10:32 AM
This is still the case. To avoid this, set up one ipad and clear all the setup screens. Right-click on the ipad in configurator and make a backup. Put that backup on your other ipads and all the setup screens will be cleared. Warning - doing this on an ipad will erase all personal data from the ipad, so do this on new ipads, not ipads that are already assigned to users.