Hiding the WiFi icon in the menu bar

glozano
New Contributor II

Hi All!
So I've done my research on this already around JAMF Nation and everyone seems to be able to disable wifi completely wether its through managed prefs or a config profile. I have a script running that turns off wifi if hard lined and in turn if not hard lined allow wifi. This is for a lab setting so they really don't need wifi.

What I want to do is to hide the icon in the menu bar through JAMF. There is a check box in network prefs "Show wifi status in menu bar" that if unchecked hides it. I tried doing a snapshot with composer but that didn't work out.

Also theres a few other prefs I was hoping to add as well. In advanced wifi prefs I want to have checked "Require admin authorization to: create computer to computer networks, change networks, turn wifi on or off." That way even if they become disconnected from from ethernet they would still need an administrator to turn on wifi. Any help or direction with this would be greatly appreciated! -George

18 REPLIES 18

NoahRJ
Contributor II

So, the plist that governs whether or not the Wi-Fi icon displays is located here: ~/Library/Preferences/com.apple.systemuiserver.plist. I've spent a little time trying to modify it with defaults write, and it's proving to be a little difficult to remove that specific AirPort menu icon. Defaults doesn't do the best job with deleting from array indexes. Easiest way forward for this would either be to remove the /System/Library/CoreServices/Menu Extras/AirPort.menu string manually from the plist (through Property List Editor or another GUI plist editor) and then either capture and deploy it to all existing users and user templates via Composer, or you can turn it into a Custom Payload by customizing the plist and then uploading it to the JSS and deploying it from there as a Config Profile.

As far as toggling those admin authorization options, you can manipulate them with airportd. If you're calling these scripts from the JSS, they'll run as root (so no need for the sudo below), but otherwise, you'll want to run something like these:

sudo /usr/libexec/airportd en0 prefs RequireAdminIBSS=YES
sudo /usr/libexec/airportd en0 prefs RequireAdminNetworkChange=YES
sudo /usr/libexec/airportd en0 prefs RequireAdminPowerToggle=YES

It'll probably be either en0 or en1, depending which network interface governs wireless on your machines.

tobiaslinder
Contributor II
Contributor II

Instead of en0 or en1 you can just run first

WIFIIF=`/usr/sbin/networksetup -listallhardwareports | grep -A 1 Wi-Fi | awk '/Device/{ print $2 }'`

And then use the result:

sudo /usr/libexec/airportd $WIFIIF prefs RequireAdminIBSS=YES
sudo /usr/libexec/airportd $WIFIIF prefs RequireAdminNetworkChange=YES
sudo /usr/libexec/airportd $WIFIIF prefs RequireAdminPowerToggle=YES

NoahRJ
Contributor II

Good call, @tobiaslinder. That'll apply those admin required settings to your wireless interface regardless of en#.

mm2270
Legendary Contributor III

FWIW, PlistBuddy can remove entries from the array in that plist, but the problem is, you need to use an index value to remove it, rather than a string, I believe, which means you need to figure out which index the entry for the Wifi menu icon would be in the array first. If, for example, its the 4th item in the array, you'd use 3 (since arrays start at 0)
You can print it with it:

/usr/libexec/PlistBuddy -c "Print :menuExtras:" ~/Library/Preferences/com.apple.systemuiserver.plist

And remove it with something like:

/usr/libexec/PlistBuddy -c "Delete :menuExtras:3" ~/Library/Preferences/com.apple.systemuiserver.plist

However, I think managing the menubar with a Config Profile is going to be the best route to take since you'll have better control between reboots and such.

NoahRJ
Contributor II

Actually, yeah, that's not a bad way to go about it you want to stick with a script. You can figure out the dynamic location of where in the array the icon is (and then subtracting one from the result) with something like this:

APIndex=$(/usr/libexec/PlistBuddy -c "Print :menuExtras:" ~/Library/Preferences/com.apple.systemuiserver.plist | grep / | grep -n AirPort | sed 's/://' | awk '{print $1-1}')

And then remove by using:

/usr/libexec/PlistBuddy -c "Delete :menuExtras:$APIndex" ~/Library/Preferences/com.apple.systemuiserver.plist

glozano
New Contributor II

Thanks guys!

cornwella
New Contributor III

Edit: This mobileconfig solution still works in 10.12:
https://github.com/gmarnin/Profiles/blob/master/Airport%20Menubar%20Disable.mobileconfig


At the risk of thread necromancy, it looks like 10.12 doesn't list the top icon entries in the com.apple.systemuiserver.plist anymore. Does anyone know where they ferreted them off to?

Thank you!

echalupka
New Contributor III

@cornwella

Which preference domain did you place that in? I'm having a hard time getting that method to work.

cornwella
New Contributor III

Hi @echalupka,

we placed it in Computers -> Configuration Profiles, where it's defined as a Custom Payload.
The end result looks like this:

8be31868e3a149feae33b86ccd2fa615

djdavetrouble
Contributor III

Is this configuration profile working for you in 10.13? I can't make it work and also my old configuration profile no longer works.
for domain com.apple.systemuiserver.ByHost

dontAutoLoad=[/System/Library/CoreServices/Menu Extras/AirPort.menu, /System/Library/CoreServices/Menu Extras/Bluetooth.menu, /System/Library/CoreServices/Menu Extras/TimeMachine.menu

going to add the script command to my firstrun script and see what happens...

eric_mead
New Contributor II

Hey there, just found this thread now. Wondering if some version of this ended up working for you, and if you have any more details about how you implemented? Thanks very much for any advice. =)

jchen1225
Contributor

This worked for me.
1f049b6de4af47e69856f4a0cc891153

MacJunior
Contributor III

@jchen1225 does it still work for you? it doesn't work for me on Monterey !=

Still works for me it seems, though not always consistent. Sometimes it disappears after a reboot/logout. I'd try re-pushing the profile.

supersizeal
Contributor

Does this still work for Mac OS 12.6.1?

yeah it should still work on Monterey

supersizeal
Contributor

I got it to work.

 

Thank you!

JST-CCHSG
New Contributor

FYI, because this post always seems to come first in a Google of this problem, and didn't work for me: the solution has changed with the latest OSX. The location of the setting has changed. The domain is now:

com.apple.controlcenter

 

Plist is: 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
  <dict>
    <key>WiFi</key>
   <integer>8</integer>
  </dict>
</plist>

Solution was found here: REMOVE WiFi icon in Sonoma