Posted on 08-10-2020 08:33 AM
This issue popped up on me in the spring and has resurfaced now as we prepare iPads for students. After setup most iPad apps install everything fine, however some devices show apps either dark or with the bullseye placeholder and say "waiting", but when you click on them you get this message:
Unable to install "Jamf Self Service"
You must purchase this app to install it
View in app store
Some of them show as installing in the system but not all. They do not process unless I manually delete every dark app and restart the iPad. This is obviously not ideal when managing large fleets, or when devices are at home with students during remote learning situations. Wondering if anyone has dealt with this issue and found a resolution.
Posted on 08-10-2020 09:09 AM
Mobile Devices: Mobile Device Apps: (app): Managed Distribution
Assign Content Purchased in Volume is selected?
Location / VPP account is selected?
Posted on 08-10-2020 09:56 AM
Correct on all.
Posted on 08-10-2020 02:11 PM
We have run into this also. Press and hold on the "dark" app and select Cancel Download. Then wait for the next inventory update (if set to Install Automatically), or install the app from Self Service. Note that this workaround requires that you have not pushed a restrictions profile to prevent app deletion.
We are not sure on the cause in our environment, but are speculating that it's related to time-of-use rules with our internet filter. During a period where internet access is disallowed on the device, the iPad checks in to JSS and gets a command to install app, but then cannot reach Apple servers to verify the license and download the app content. Apparently device communication to MDM still works when internet is blocked by our filter.
Posted on 08-14-2020 09:15 AM
That is interesting, though we do not have any such limitation set. My goal here is to avoid having to physically touch over a thousand apps as that defeats the point of remote management and it is not easy to direct hundreds of young children from home how to do this in a timely manner. I am reaching out to my rep again as I have an iPad right here that will not install apps after the deletion. It immediately gives this error and goes dark.
Posted on 08-15-2020 07:35 AM
Edit: My initial workaround only lasted for about half of the deployments. Back to simply echoing the sentiment of experiencing the situation and not having a solution.
I am experiencing the same issue. We are pushing 10 apps from VPP and then configuring the home screen to a specific order. Interestingly, I discovered if I push all but Adobe Acrobat Reader it works exactly as expected. So I am just leaving Acrobat as a manual install from Self Service for now.
Posted on 08-24-2020 05:53 AM
We are experiencing the same issue, has anyone found resolution from JAMF yet?
Posted on 08-24-2020 07:43 AM
Is this a Jamf issue, or Apple issue?
At my organization we do have a restriction profile which blocks app removal as a default.
Posted on 08-24-2020 08:32 AM
I moved all my iPads from our Jamf Pro instance and into Jamf School because, after trialing it for a month, I found the interface more friendly for solving things like this. For instance, here is how I've been solving this same problem with Jamf School:
Maybe there's a similar tool in Jamf Pro for managing iPads, but I haven't found it, and have stopped looking at Jamf Pro for iPad management. I use Pro for managing our laptop fleet and School for the iPad fleet, and I'm very happy with this compartmentalization.
Sorry, I know this isn't a solution; just offering my opinion and some info. It was a PITA to have to re-enroll all our iPads into Jamf School but I'm so happy that I've done it.
Posted on 08-24-2020 08:50 AM
This is really what's needed in Pro.
Any word if this will be ported over?
Do we know if it's an Apple sourced issue or Jamf?
Posted on 08-24-2020 09:51 AM
I second that what atomczynski replied. Having a button to "reinstall on stuck" would be something a PRO version should have!
Posted on 08-25-2020 09:56 AM
I have had some success with going into the individual Devices
Mobile Devices > Management
Cancel all Pending Commands
Click on Update Inventory
It has worked on some of the IPADS I'm trying to load apps too, and not others.
I was on the line with Jamf Support, and this is what we did. With kids going back to School, the Apple server is really busy, and it looks like when JAMF is trying to verify we have purchased the app, it is timing out with apple, then doesn't think we have purchased, and given the error. I'm hoping in a few days Apple is not so swamped and this works more seamlessly.
I hope this helps others.
Posted on 09-13-2021 02:26 PM
Thank you for this! This Worked!
Posted on 08-25-2020 01:00 PM
I have ipads out with students, has anyone figured this out? I've only been able to work around it by erasing all content and settings with device in hand. I have hundreds of ipads out right now... and essential apps aren't working
Posted on 08-26-2020 07:29 AM
We are handing out devices today and I'm seeing this as well with our core apps.
Posted on 08-27-2020 08:18 AM
As we migrate devices from Meraki to Jamf and hand Jamf devices out we are also having apps not installing like this. Some of the devices are already in student's home.
I wish we had that retry feature from Jamf School in Jamf Pro.
Has anyone created a request to upvote for it yet?
Posted on 08-27-2020 09:12 AM
I have created a FR. Please click here and upvote.
The proposed fix to disable App Store restriction, login to the App Store is not a viable solution at this time. Students are all remote.
Posted on 08-27-2020 10:07 AM
I'm experiencing the exact same problem.
Posted on 09-02-2020 05:44 AM
I had this problem and I was able to solve it by first canceling them on the device, and then clearing the Pending Commands in the Management tab for the affected iPad.
Posted on 09-02-2020 04:12 PM
We have had this problem for quite some time, half a year or so, after restoring iPads from iCloud backup. It appears to happen in all cases, independant of network connection. We're using Jamf School, an the retry to install app un devices stuck, as previous suggested, doeas not seem to have any effect. Restricitions does not seem to be of importance, as both students and teachers experience the problem; teachers having very few restrictions, only mandatory PIN.
Cancelling installation/deleting apps is normally not an option, as apps may contain valuable data that the user want to preserve, hence the restoring from backup instead of fresh install. Also the students have a fixed layout profile, preventing normal app deletion, so requires that they know the back door for delting apps through Settings-General-iPad storage.
We have, however, found a somewhat reliable workaround procedure (but have not been able to verify if all steps are neccessary):
Posted on 10-22-2020 12:12 PM
Jamf School and I have this issue as well.
Edit: To further add to this, it seems to happen when I'm setting up shared ipads, if i set up the second user before the apps have finished installing for the first user, then they're greyed out for all and will not complete.
Posted on 10-23-2020 01:34 AM
Got this from the other thread linked above, might help.
Posted: 8/27/2020 at 11:59 AM CDT by jdhainley
I have also run into this issue. My solution:
1. Hold down icon until the option to Cancel Download appears and cancel download.
2. Cancel the download on all of the apps that are doing this
3. Restart the device
4. Send a Blank Push from the Management Commands to that device
Hope that helps!
Posted on 10-23-2020 05:01 AM
Got this from the other thread linked above, might help. Posted: 8/27/2020 at 11:59 AM CDT by jdhainley I have also run into this issue. My solution: 1. Hold down icon until the option to Cancel Download appears and cancel download. 2. Cancel the download on all of the apps that are doing this 3. Restart the device 4. Send a Blank Push from the Management Commands to that device Hope that helps!
To piggy back on this, I've found you don't need to reboot the device. Just send the inventory update command & blank push and it will start installing.
Posted on 12-01-2020 09:22 AM
@SirSir @MarkDixon Any idea why I can't get the "cancel download" option? I press and hold I get edit screen and share app, followed by jiggling icons and no menu. I ended up having to go to the scope of the app, adding the ipad as an exception, waiting for it to remove, then removing the exception. That is very unpleasant!
Posted on 01-29-2021 08:25 AM
@chrisdaggett By chance do you have those apps locked from user deletion? I ran into this again this week on one of my apps that was unchecked so students couldn't remove it and I couldn't either. Even after reenabling the option it still wouldn't allow this.
Posted on 04-23-2021 03:09 AM
If you have the Home Screen Layout payload activated then you dont have the option to cancel the download from pressing and holding the failed app. Nor do you have the option to delete the app from the Storage settings (which is currently the only method when you have HSL payload). So the simplest fix i've found is to:
1 - Exclude the problematic device from the Configuration Profile with the HSL payload.
2 - Cancel the download(s) on the device.
3 - Delete any pending apps in the Jamf History tab.
4 - Update Inventory or manually download the apps from the Self Service.
5 - Remove the Config Profile exclusion rule.
It's only happened a couple of times for us so not too much of a hassle but i wouldn't like to do it often.
Posted on 02-17-2022 11:23 AM
I want to leave my experience here with this,
After trying to install the app by license and by app with by device and by user, the error never went away even after re-installing the app or restarting the device. I used another iPad to test and tried un-enrolling the device and signed in myself and found that the app can't be installed because of the version of the device doesn't meet the app store requirements (ios 13 is needed to download apps from the app store, these devices only went to ios 12.5.5). Now I can't use these devices because education apps, material apps, or apps that connect to service cannot be used because they can't be updated.
Hope this helped.