I have a JSS with ~ 1000 clients, so quite small. It uses AD
authentication. I have noticed that some users can login quickly, while
others can take over a minute to login. Does this sound like a mapping
HelloAnyone unable to add location information such as department and
building for users that own multiple devices in JSS 9.3? To clarify I
have some users that own or use more than one system me included. I am
unable to add department and building f...
I have 20 new macbook pro's that i just gave to teachers. I added the
group they belong in AD to the mac in "allow administration by" They can
install software when they are in our network with no issues with admin
rights. As soon as they go home the...
Hi All; I haven't seen a discussion about this in the forums that wasn't
several years old and was wondering what suggestions there were for
running casper off of. The current use case is imaging up to 10 machines
at once of various makes and models ...
This is a recent development in our systems, both production &
development. Both of the servers now show hidden values in a MDM
profile, settings that we do not set, settings that show "not
configured" when viewed at large, but when selected are clea...
The subject pretty much says it all. If I make changes to a
configuration profile that is already installed on the devices and then
click the "distribute to all" button, nothing happens on the devices,
however a new item appears in the queue for each...
In searching JAMF Nation I've found bits and pieces to the answer to my
question, but I'd like to put the question out there to see how you're
handling this. We haven't yet signed up for the new VPP and we currently
don't have MAS apps available for ...
I am not a shell scriptor yet (just purchasing Learning the Bash), but
in the meantime, does anyone have a EA with a script that adds a
specified time (three years for us) to the PO date to establish a
retirement date for all computers?
So I just wiped my SoftwareUpdate Server and redid it and now I can't
seem to get 10.7 machines to connect to it properly. We use a profile to
push the settings to all machines and it sets them all to
When enabling Home Folder collection in the JSS (Inventory Collection
Preferences), it appears to run the command du -sh /Users/username. This
can cause performance issues when network shares are mounted to points
within the home folder, due to the o...
Windows Server and Unix/Linux require JDK, but OS X Server doesn't list
that as a requirement (scroll up on that same page).
Morning All -My objective is to create display a message when an
application (Omnigraffle) is opened for the 1st time and only the 1st
time. The application is being installed as part of our Coreload so I
cannot rely on the native "complete message" ...
Has anyone been to these trainings? How are they? How about the test at
the end to get certified? Any material out there to study? What is the
test format? I am thinking about attending these soon and would like to
I'm going crazy with this one.. hopefully someone out there has a
similar setup and can help. We're looking into setting up an OS X print
server. That is, a mac-mini server with all of our printers on it as
queues, which client machines then connect ...
I am using bits and pieces of tkimpton's script
https://jamfnation.jamfsoftware.com/discussion.html?id=5327 and I am
wanting to do an ip address comparison. How can I take the existing
computer ip address and compare it to our ip range. as an example...
Hi i've been struggling enrolling ipad into casper from configurator. We
have 3 cart full of ipad supervised and controlled by their own laptop
on those cart... They will be supervised by those configurator, but for
inventory and other informations p...
I have a departmental JSS that I need to migrate/integrate with a larger
unit's JSS. I was wondering if I can use the API or perhaps a method you
have found to migrate the JSS-housed scripts? Looking through the API I
see that a test returns some met...
I am getting this on a regular basis even though the encryption either
completed or just started. It just gets stuck at that percentage a good
number of times but isn't consistent. Any ideas?
I built a NetBoot image using OS X 10.9.2 on a MacBookPro11,1 and am
serving it out with a OS X 10.8 Mountain Lion Server. Whether served
over NFS or HTTP, the machine fails to boot any MacBook Pro (Early
2011). It works flawlessly on every other mac...
Recently when I go into the App log, there appears a pie graph that says
"Locked 13 minutes" or other times. Some go back to the middle of March.
Some show as recently as yesterday. I have looked at many laptops and
they are being used for many appli...
I have done some reading yet haven't found a permanent solution to my
issue. It seems to be a bug in OS X 10.8,Running 10.8.5 updated from
10.6.8 and users cannot save mounted servers in their sidebar favorites
as they disappear on restart.So the AD ...
Hi: Probably simple and covered before, but not finding the answer. How
can we send log output to the "Result of Command" part of the policy log
or anywhere in the policy log, when running a command from the run
command field? We'll get blank output ...
We are planning to upgrade the os for the mac mini that is currently
running our jss from 10.8.5 to 10.9.2. Are there any issues that have
been found with running the latest version of jss on 10.9.2? Should I
expect any problems if I just update to 1...
Smart configurations are not pulling any parent configuration packages
in Casper Imaging (at any smart config level). Both the JSS
'Configurations' web page and Casper Admin show that the parent and
child relationships appear to be recognized. We hav...
I am trying to create a package for Lync 14.0.7 using composer Normal
Snapshot option. However, it always capture my username(sip id) which i
don't want it to capture. I want that it should include the server
details required for manual configuration...
Is there a way to flush a policy from the command line? I'm pushing a
big package out to each client and the majority it works fine. The
package is a 5GB package and most get the package and everything is
fine. But some I've noticed the JSS reports a...
Looking for some advice on what could be the cause of the following... I
have setup our Mavericks update .pkg (produced by createOSXInstallPkg)
to be cached to our Mac clients ahead of time and then have scoped a
self service policy at macs that have...
We apply a restriction profile to our younger students ipads, which
includes disabling adult content in ibookstore and reduced (G) level
content ratings. Does this apply to the newsstand as well.